Check Valves
Description
Symbol
Cross Section
Cavity Details
48
Technical Features
VH005
METRIC Cartridge - 420 bar
Direct acting - Poppet type
ICV0.M24 Valve Series
A screw-in, direct acting, poppet type
check valve. Main use is as a blocking
or load-holding device. The ICV0.
M24 allows flow passage from port
1 to 2: the cartridge has a fully gui-
ded check which is spring-biased
closed until sufcient pressure is ap-
plied at port 1 to open to 2. The flow
is blocked in the opposite direction
(2 to 1). Insert type valve: the pop-
pet seals directly against the cavity. .
All external surfaces are zinc plated and
corrosion-proof. All valve parts are made
of high strength steel. Poppet is harde-
ned and ground to guarantee minimal wear
and to extend service life. Compact size.
Metric cavity
Technical Data
49
Specications may change without notice.
Performance Details
Ordering Code
Flow (l/min)
Pressure (bar)
Maximum operating pressure 420 bar
Maximum flow 100 l/min
Cracking pressure See table below
Maximum Internal Leakage
0,10 cm
3
/ min @ 10 bar
0,10 cm
3
/ min @ 420 bar
External component treatment
Zn/Fe - standard (96h)
Zn/Ni (720h)
O-ring Temperature Range -30° C to 110° C (standard sealing NBR - BUNA-N)
Oil Temperature Range -30° C to 110° C
Fluids Mineral - based or synthetics with lubricating properties
Viscosities 7,4 to 420 cSt
Filtration 20/18/15 ISO 4406 (maximum ltration admitted)
Orientation No restrictions
Installation torque 50-55 Nm
Technical Specications for characterization see page 480
Oil testing condition ISO VG 46 cSt
Seal kit code SK.009
Coining kit CK.004 (for more details see page dino)
Weight 0,100 kg
Note: The performance chart
illustrates flow handling capacity for
standard bias springs. p/Q curves are
recorded at TOil = 40°C and 46 cSt
